- Brand Name: YET/MC
- Model Number: 2CH RF Remote Control Switch Relay yet402pc-v2.0
- Use: Universal
- Place of Origin: Guangdong, China (Mainland)
- size: 61.9mm x 34.6mm x 15.6mm
- Output Voltage: AC and DC optional
- Operating Temp: -40C~+60C
- Operating Frequency: 315, 433MHz
- Standby Current: 15mA
- Use range: Home and industrial appliance
- Chip: fixed code ,learning code and hopping code
- Memory: can store more than 400pcs
- Distance: 100m
Packaging & Delivery
|Packaging Details:||common packing|
|Delivery Detail:||3~5 days for small quantity ,10~15 days for large quantity|
SpecificationsWireless Receiver 2CH RF Remote Control Switch Relay Output for Light New YET402pc-V2.0
1)12/24v AC DC
Wireless Receiver 2CH RF Remote Control Switch Relay Output for Light New YET402pc-V2.0
Rf Custom Transmitter Remote Controlled Switch
Store 400 codes electronic Controller Switch
Wireless Remote Control Switch YET402pc-v2.0
- Wireless control, easy to install.
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
- Model No.: YET402PC-V2.0
- Channel: 2 CH
- Control Mode: Latched (Press -> On; Press other button -> polarity changes)
- Decode: Keelog rolling code
- Power Supply (Operating Voltage): DC12V±1V (S2L-DC12); DC9V±1V (S2L-DC09); DC24V±1V (S2L-DC24)
- Working Voltage Range of Relay: 12V/24V AC/DC
- PCB size: 68mm x 48mm x 20mm
- Case size: 75mm x 55mm x 30mm
- Maximum Working Current: 5A / each channel
- Learning transmitter’s codes:
Press “learn 1” or “learn 2” for 1 second, the “learn_led” light, then, press the button which you choose on the transmitter till the “learn_led” flash and go out, the transmitter’s code has been stored.
• Repeat the above steps for other transmitters.
- Erasing transmitter’s codes:
Press “learn 1” or “learn2” and hold on to make the “learn_led light till go out, all codes of transmitters which had been stored are erased.
- Model No.remote control(Any model about the remote controls is okay)
Channel: 4 CH
- Remote Control Distance: 100m / 300ft (theoretically)
- Encode: Fixed code by soldering
- Unit size: 61.9mm x 34.6mm x 15.6mm
Power Supply: 1 x 27A -12V battery (included, can be used for 12 months)
- Initial state: B, D = Normally Closed; D, K = Normally Open.
- Press button 1: Turn on relay 1; Turn off relay 2
- Press button 2: Turn off relay 1; Turn on relay 2
- Press button 3: Turn off relay 1; Turn off relay 2
- If you need longer range, we can offer you the other series of remote control, such as CV Serie ( 500m / 1500ft ), CB Serie (1000m/3000ft); Or you can replace the internal rolling antenna with the external extend antenna on the receiver for improve the range.