- Brand Name: YET/MC
- Model Number: Remote-controlled Sliding Door ModuleYET835
- Use: Universal
- Place of Origin: Guangdong, China (Mainland)
- Working volt: 6V/12V
- Model: Remote-controlled Sliding Door Module YET835
- Static working current: <=7mA
- Working frequency: 315MHz/433MHz
- Output current: <=10A
- Control voltage: AC/DC
- Sensitivity: >= -105dBm
- Current: 12mA
- Power: >10mW
- Transmission speed: 50-60KHz
Packaging & Delivery
|Delivery Detail:||1-3days after received payment|
SpecificationsRemote-controlled Sliding Door Module YET835
1.Easy installation and simple to use.
2.rolling code .
Remote-controlled Sliding Door Module YET835
MAGICDOOI-DBL-E01 remote-controlled sliding door module
1. Depending on the safety doors that dependable private transmitter; You can stop the process of sealing the door opens back jamming on the fly.
2. door open switch with input current limit is exceeded (impingement on the fly) to stop the door opens back-off process.
3. bi-directional electric window switch with or can work with a single button.
4. the door moves with a warning beep. Beep may be canceled.
5. If siviç or the control and continuous beep, not start the engine.
6. Current limit can be set to between 9A and 15A. Shut-off time can be set between 3 s and 10 s.
ELECTRICAL values are:
SUPPLY VOLTAGE… … … … 12 V DC
CURRENT calm … … … … … … 10 mA
Maximum Output CURRENTS … … … … 15 A
INSURANCE VALUE OF THE CURRENT … … … … … … … 20A
current limit … … … … … … … … 9A~15A
Shut-off time………………………… 3s~12s
Remote control distance ........... 20m
1. to avoid the unit from moisture and dust in a location in the vehicle.
2. Installation according to the schema. Remove the yellow-red wire to the vehicle fuse his battery connect the pole's title character (s). Connect the black wire to the vehicle chassis. must have a minimum cross-section of 2.5 mm 2 extra cable.
3. WHITE-green and Gray-Green wire to connect the ends of the switch. Connect 12V to the other end of the button
4. connect the motor according to the ends of the cables to the aspects of WHITE and GREY,Grey connect +12V
5. The special ends of the safety of the wiring harness.
7. installation is complete, plug the fuse before the operation of the unit, please check with the electronic switch. Control and open the full single-tapping full off siviçlere in advance. The same process is repeated several times.
8. Door check door open by touching the safety that dependable when shutting down.
10. Module 12A current limit is set, 8 s off time for the doors, the normal settings do not replace it. Large and heavy for the doors you may need to increase the settings a bit. Small and short for the doors you may need to reduce the settings a bit. The clockwise direction sets the anti-clockwise direction is reduced.
11. If the two button is pressed is a beep, beep tone will be canceled. More than one if it is pressed again the two button two beep, beep sound is activated.
REMOTE CONTROL CODE OF TEACHING:
1. the module up to 3 units can be taught with a special Wick control and transmitter.
2. Special roving transmitter must be taught in fourth place.
3. A single control, if one is to be used 3 times before the multi-control principles, then it must be programed into a transmitter.
4. Teaching process for Black-WHITE cable 12V. Enters the learning module.
5. Press and hold button on the Remote 2 s
6. It must be programed into all of the controls in the same.
1.Accept OEM, ODM.
2.Print logo on the case and pakage
3.Payment Details :30%deposite,70%balance before shipment.Payment accept T/T and western union optional.
4.Minimum Order:100 pcs(accept trial order)
5.Delivery Details:within two weeks.
1.Your inquiry related to our products or prices will be replied in 12 hours
2.Well-trained and experienced staffs to answer all your enquires in fluent English
3.OEM&ODM,any your customized products we can help you to design and put into production
4.Protection of your sales area, ideas of design and all your private information
5.Deliver by air mail or ship for your orders