- Brand Name: YET remote control on off switch,controller,220v receiver
- Model Number: 402PC-220V
- Use: Universal
- Place of Origin: Guangdong, China (Mainland)
- Operating voltage: 220V
- Static operating current: ≤7mA
- Working temperature: -40°C- +80°C
- Receive sensitivity: ≥-105dBm
- The working frequency: 315MHz, 433MHz
- Output Voltage: AC and DC optional
- Output current: ≤10A
- Name: remote control on off switch,controller,220v receiver
- certificates: CE/ROHS
- Maximum storage: 30pcs of learning or fixed code; 6pcs of rolling code
Packaging & Delivery
|Packaging Details:||carton,100PCS per case ,carton size:48*38*26CM, GW=NW+1.8KG for remote control on off switch,controller,220v receiver|
|Delivery Detail:||3-5days after received payment|
2.support ODM order
5.remote control on off switch,controller,220v receiver
remote control on off switch,controller,220v receiver YET402PC-220V
Our factory design and produce the two channel wireless intellect receiving control what can provide switch signal to the two relays, so it can meet many requirements such as: control motor’s corotation and reversal; the connection and lock of the switch and other special control programs. This kind of wireless intellect receiving control main apply to auto door, curtain, lifting appliance, gate way, lifter, industrial control and security field.
This kind of wireless receiving control is high confidentiality, large memory space, stable characteristics, low power consume and very convenience, it is unnecessary adopt the traditional wire jumper or dip switch code but only receive and store the wireless signal from the remote control, and The lost learnt control can not work if you delete the memory message of the receiving control, however, it should learning again by the owner if want to obtain the right of use.
2. The way of output
A. Signal keeps 3 seconds-- “1” connect
B. Signal self-locking -- “2” connect
C. Signal interlock -- “3” connect
D. Signal point start--disconnect
(check the Circuit diagram for details)
3. Learning way and steps
1. Press learning key of receiver—the pilot lamp light—release learning key and pilot lamp extinguish , indicate enter into the status of learning.
2. Press any button of the remote control, indicate learning success as the pilot lamp flash 5 times and automatically exit learning state. Receiver automatically exit learning state if you do nothing in 32 seconds.
4. Delete memory message
Press the learning key of the receiver—pilot lamp light—hold on pressing over 8 seconds until the pilot lamp extinguish, which indict success to delete the memory message.
5.Main Technique Data:
Static working current
-40°C ~ +80°C
10A 250VAC;10A 277VAC;12A125VAC
Receive the type of encoding
Learning code, Fixed code, Rolling/Hoping code
Maximum storage for transmitter
30pcs of learning or fixed code; 6pcs of rolling code